Ultra Filtration Plant

Product Details:

Commercial Reverse Osmosis Plant send midea filter frp carbone midea filter FRP Microne filter frp 20/4 dia Hpp pump , Electric penal Ultraviolet system, online water testing miter

Product Details:

our filtration is is applied to either skim milk or whey to concentrate the dry matter to the required total solids (TS%). The
commercially available powders names are based on the protein type: milk protein (named casein) or whey protein. Their protein
content (percentage of protein in the dry matter) ranges from 34-80% (e.g. Whey Protein Concentrate WPC60 has 60% protein
in the dry matter or Milk Protein Concentrate MPC60has 60% protein in the dry matter).

High-protein products such as Whey Protein Isolate WPI90 (90% protein in the dry matter) may first undergo a microfiltration
(MF) treatment step to lower the fat content. our (UF) is then applied to the MF defatted whey protein permeate to
standardize and increase the protein content in the total solids.

To maximize the solid content, it is common to use diafiltration (dilution with water) in later stages to wash more small non-protein
components (i.e. lactose and ash) into the UF permeate. It is also common to increase the feed spacer size of the element to
maximize the solid content during the later stages of the UF system. Additionally, a tighter UF membrane is commonly used for the
concentration of products with 80% protein (or more) in the dry matter.

Our Plant is a 10,000 Daltons (Da) molecular weight cut-off polyethersulfone (PES) UF membrane developed for use in food
& dairy applications. This membrane is commonly used for whey protein and milk protein concentration applications. Combined
with our sanitary outer shell, these membranes are ideal for milk and whey protein concentration.



i hope this information is okay for you so please send us your requirement so we will discuss on this

i am waiting your replay

Additional Information:

• Production Capacity: 1000 to 50000 liter per hr

Product Details:

01. Ultra filtration

An ultra filtration membrane is a membrane that effects separation on the principle of sieving. The membrane has pores that are in the nanometer size range, and will therefore prevent particles, colloids, microorganisms and dissolved solids that are larger in dimension than the pores in the membrane surface from passing. The membrane therefore acts as a physical, size-exclusion barrier, and it is for that reason that ultra filtration membranes produce such a high quality product.

Ultra filtration membranes are produced in either flat-sheet or tubular-type geometries. The membranes that were used in this study are referred to as capillary membranes. The membranes are narrow-bore tubes that have an outside diameter of 1.8 mm and a lumen (bore) diameter of 1.2 mm. The membranes are internally skinned, which means that the pre-treated feed water enters into the lumen from where it filters outwards under a pressure driving force. The trans-membrane pressure required to produce clean-filtered water is typically less than 2 kg/cm², typically 1.2 kg/cm²

 

• Produces a MF/UF quality effluent suitable for reuse applications or as a high quality feed water source for Reverse Osmosis treatment. Indicative output quality of MF/UF systems include SS < 1 mg/L, turbidity < 5 NTU and up to 4 log removal of virus (depending on the membrane nominal pore size). In addition, MF/UF provides a barrier to certain chlorine resistant pathogens such as Cryptosporidium and Giardia.

 

• The resultant small footprint can be a feature used to address issues of visual amenity, noise and odour.

Scope of Supply

02. Ultra Filtration

 

§ Pre-filter

§ membrane Module

§ Electrical control panel

§ Electrical control valves (Product & Reject flow)

§ Rota meter

§ Pressure gauge

§ Mild steel PU painted frame

§ UPVC piping , hoses & quick coupling complete

§ Feed pump

§ Back flush pump

§ In-built EBF & CIP (Clean-in-Place) valve configuration

Additional Information:

• Production Capacity: 60 m3 day
• Delivery Time: 30 day
• Packaging Details: as per requirement

Product Details:

We offer FRP Ultrafiltration System.

Product Details:

Dimensions / Weights

Diameter bores mm : 05 Length in cm    : 44.5 Diameter inch  : Ø3.5 Weight kg  :2.5

Additional Information:

• Production Capacity: 500 pcs month
• Delivery Time: 10 week
• Packaging Details: BOX

Product Details:

Nozzle cap :Polysulfone 2 nos 
Cap  :  Polysulfone 2 nos  
Case  : Polysulfone 2 nos
O-Ring type WG-21 : Fluoro-rubber (FPM) 2 nos 
Potting Resin : Epoxy Resin 

Membrane Area :7.8 m² (83.9 ft2 )

Standard Water Flux :4.3 m³/h (19 gpm)

Maximum Feed Inlet Pressureb :6 bar (87 psi)

Maximum Temperature :98°C (208°F)

Applicable pH range " 1 -13 

Standard Inlet Feed Flowc :3.8 m³/h (16.7 gpm)

Operating Weight :8.5 kg (18.7 lb)

Shipping Weight : 2.5 kg

Standard Preservative  : 1000 ppm Benzoic acid

Feed/Conc. Connectors:2S Ferrule

Membrane Chemistry: Polyethersulfone (PES)

Molecular Weight Cut-Off : 6,000 Dalton

Hollow Fiber Inner Diameter : 0.5mm 

Additional Information:

• Item Code: 02
• Production Capacity: 3.8 m3/hr
• Delivery Time: 12 week
• Packaging Details: box packing